Видео

Bravo 🎉

Can i send you my models

May I know the wheelbase of this bodykit?

hi my first model. Can i use simple green on a new model to remove factory shine for primer or is sanding required?

Excelente trabajo amigo quisiera saber dónde puedo encontrar los archivos de impresión 🤠

awd eclipse? also no brakes

I can tell yo as an e-type owner myself , there are so INACCURACIES with this kit its worthless to even try to correct , dont waste your time. WRONG : TRANSMISSION, EXHAUST MANIFOLD, FAN BEHIND RADIATOR SHOULD NOT HAVE A SHAFT FROM ENGINE , ect.

I really liked that. The steering wheel turned out very nice. The "clear" colors - whether Tamiya or Mr. Hobby/Gunze - are unfortunately underestimated by many model builders.

I love your attention to detail, but the color choices for this build is rather non pleasing to me but each is their own. would have left the stripes off since they don't jive with the interior color and the red is just meh.

Very informative video Tom, especially to us all that still need to dig into the 3D printing world 😊 Thanks for sharing 👍🏼

Does the sd card come with it

I've seen some of your other creations so, YES! We want to see this exact same model taken to high standards of quality! It is truly amazing how far these printers have came in the last 3 to 4 years along with their affordable pricing. I also love how the companies have take the cell phone approach when it comes to budgets and models offered. Most of us can find a printer that is able to worked into just about anyone's budget. Eventually, if you were purchasing models, you're gonna break even and then start saving money. Not to mention being able to adjust the scale and event print models that are no longer produced and make one's that never were. As I learn my FDM and resin printers better, I'm going to offer printing services for individuals that have their own files but do not want to get into the physical printing themselves. Just like I do not wish to paint the models for others. Like you, their are many others that excel in the finishing of these kits way better than I ever could! Sir, yours are outstanding! Do you offer start to finish services? If you do, I'd love to be able to list you as a contact for model finishing. I know I'd be honored to one completed by you! Thank you for this review and all of your other work. It help so many of us. Please know this as it's not mentioned enough. I've seen so many great "RUclipsr's" vanish simply because they thought of their time here being a waste. I know time is money and you're not compensated near enough but please know, my skills (and others) are growing because of this channel. Thank you and I hope I get to see this beautiful car and model get brought to the next level. Depending on what scale you chose, I might have a light kit that I'd love to donate! It would be from an RC kit but I believe it would work with no problems. Sorry for the long reply! Thanks again.......Justin

Found a hobbyist vacuformer on Amazon. It’s small, area is small, but seems it would work for the “glass.” It’s called “We R Memory Keepers Mold Press Machine.” Only $83, forty sheets of thermoplastic is roughly $40. You supply the vacuum. I input a link, but then my comment got deleted. I ordered one, hasn’t arrived as yet.

Would love to see a more detailed print of this, with finishing, etc. I have a question though that I might have missed. If you want to build it in full (like with clear plastic for glass, and probably head/tail lights), is this something you can do with the 3D printer as well? Is it just with another resin? And also, did you print the wheels with the "rubber" resin or all the same hard one? Would really love to buy a 3D printer to do some cars, but I have so many doubts that I don't know where to begin to see what's good for me, resin, extrusion, etc? (eg, I would love to print custom 3D parts for Hot Wheels customising) And also safety concerns, ease of use... I really don't know where to start, so I just don't haha! BTW, I've been following for a while but just now noticed... are you Dutch? (because of your language settings in the computer haha). Wouldn't have noticed before, but I moved to NL a bit over 2 years ago :D

doing it wrong. You should have: 1-better washed the resin (one dirty wash + one clean wash), 2-remove the supports while dunking the parts in very hot water, 3-dry the parts, 4-remove the supports.

I use cults3d for various things but i havent used it for modeling yet. thanks for giving info on the builder. he has alot of parts that i will be printing soon.

I would like to see you make a 3d printed model up to your normal standards.

Please do full build :)

Hello! Nice kit! I think you can use clear parts’ files to print the templates to drag windows etc using thick film or 0,7 mm plastic. Just templates need to be polished. Best regards, Alexander

I made a video about how to make 3d printed parts transparent like a glass - ruclips.net/video/qpEG2qS6Hr8/видео.html The result, it seems to me, is not bad. This is glass for a Land Rover Defender Radio Controlled car printed on a 3D printer. I have already completed its assembly and plan to release a video about it. Perhaps this will be interesting to you🙂

I would love to see a video that shows what it takes to smooth out the layer lines on a body like that.

This was a good video Tom, I also print kits using my 3d printer but didn’t think there was an audience for it on YT. I guess there is…

Hi. I have the Halot Mage (the 8k one), I like the printer and it does print well but I feel like its not printing at its full capability. So was wondering if you could share your printer settings/chitubox settings so I can try them?

3d archive made in Brazil, excelent.

Why not share to other youtuber to make the video for MF GHOST

Yes more about 3d printing I would love to get into this. Been looking at different systems but there's so much out there and being a beginner is hard to tell what's good or decent for your first setup. Thank you and love this channel keep up the great work

Cool build. I think it would be a good video to see you go balls to the wall on a 3d printed kit. Bring it to your normal very high quality.

Awesome! I always wanted to see a resin-printed model kit put together. Thank you for this video and definitely build more of these!

Great job! I'm enjoying making 3D models myself more and more and I'm glad you're enjoying it. I have a few built and to be built models from Andrey Berozdny. The biggest problem in fact concerns the glass parts. I hope you have some ideas on how to do this. I just tried the hot air torch... Not great!😁

Vacuum Forming Machine Power Former Heat Molding Tool w/Steel Balls Lab Equipment Is a good vacuum forming machine. I did the video on my Channel about it a while back. And it's really affordable as well!

I like learning more about the 3D printed kits. It’s something that I will end up trying. The details and the tips you discuss are very helpful to me as this is a very specific type of 3D printed project. 👍🏻

I like to see the car build like on your regular videos.

Leon😢😢😢😢

i've been wondering how to do this! i'm getting into airbrushing my kits so this is helpful. @ 1: 26 you said "don't do this" and the fizz happened please explain what happened so i don't do it. THX

Try graphite powder rubbing on matt black. Look up some videos for Mandalorian helmet. This will make really shiny metal look.

Find piece of work very interesting to watch, I'm inclined to agree with you the cover on hood looks better painted red.

I just looked up the price for that. Holly crap dude it's $1500!

Wow amazing mind-blowing I want to purchase this little car

Very interesting Tom, always great to know what items are available out there to help us modellers 👍🏼 Thanks for sharing 😊

Being someone who is also setting up a small warehouse space I appreciate this video.

K

Please do the Nissan Silvia (Mona Lisa) from Tokyo Drift next

Great video! How did you heat the can up without having it explode?

Nice Car. 😃👍.

I must admit that the combo Red with blue interior is stunning ! and Gravity paints has the correct Magma red color set for sale 😁

I currently use Tamiya Fine Gray Primer in a can and the finish comes out so smooth, but admittedly it goes on pretty thick. I've seen you use Tamiya Gray Primer that comes in a bottle and also Zero Paints Gray Primer. Which one do you recommend?

i'm having a real difficult time getting my hands on certain tamiya paints and chemicals, a couple of which i saw in your warehouse. do you ship to hawaii?

A question to you is why not wet sand the whole thing

Black Metallic Pearl (Volcano Black Pearl Metallic) with a red or tan/orange interior.

Friends in high places ..lol